How Much Concrete Do I Need for a Patio? Work It Out Before You Pour
A patio is area × thickness, then ÷ 27 for cubic yards. Measure the length and width, decide the thickness, and the rest is simple arithmetic.
The formula
Volume in cubic yards = Length (ft) × Width (ft) × Thickness (ft) ÷ 27
Thickness is usually given in inches, so convert it to feet first — 4 inches is 0.33 feet. The ÷ 27 step matters because there are 27 cubic feet in one cubic yard, and ready-mix concrete is sold by the cubic yard.
A worked example: a 16 ft × 12 ft patio at 4 in thick
- Volume: 16 × 12 × (4 ÷ 12) = 64 cubic feet
- Cubic yards: 64 ÷ 27 = 2.37 cubic yards
- With 10% waste: 2.61 cubic yards
- Bags: about 107 × 80 lb bags, 118 with waste
A smaller 12 ft × 12 ft patio at 4 in is 48 cubic feet = 1.78 cubic yards, 80 bags (88 with waste).
How thick should a patio be?
Patios are typically 4 in thick (minimum 3–3.5 in), with a 3,000–4,000 PSI mix.
Control joints
Space control joints 2–3 times the thickness in feet — for a 4 in patio, joints 8–12 ft apart, at least 1 in deep, with panels as close to square as possible.
Drainage
Slope the patio away from the house, 1/8 to 1/4 in per foot (1/4 in per foot is the recommended maximum). Compact the subgrade and keep it damp, not muddy, before the pour.
If you would rather not do the arithmetic by hand, run the same numbers through a patio concrete calculator — it gives cubic yards, bag counts, joint layout and drainage fall in one step.
Comments
Post a Comment